| T&W Resin | Solvent | NV Wt% | Viscosity | Acid No. | Oil | Description | |
| 331-60M | MS | 60 | Z-Z2 | 3 | Linseed | Fast dry, abrasion resistant, gym finish | |
| 340-50M | MS | 50 | Z-Z2 | 3 | Linseed | Fast hard dry, economical gloss finish | |
| 370-60X | Xylol | 60 | R-U | 3 | Linseed | Fast dry, good abrasion resistance, industrial enamels, aerosols | |
| 371-45M | MS | 45 | T-V | 3 | Soya | Maximum capability with alkyds(496-45M) | |
| 381-45XVZ | Xylol VMP PM | 45 | S-U | 2 | TOFA | Fast dry, excellent abrasion and water resistance | |
| 385-55M | MS | 55 | W-X | 3 | Soya | Excellent stability, satins | |
| 390-50M | MS | 50 | Z1-Z3 | 3 | Soya | Economical flats, satins | |
| 401-65XB | Xylol nButanol | 65 | Z3-Z5 | 2 | Linseed | Fast dry, excellent gloss, abrasion resistance | |
| 429-45M | MS | 45 | R-T | 3 | Linseed | Same as 429-50M, lower solids, easier handling | |
| 429-50M | MS | 50 | Z1-Z3 | 3 | Linseed | Excellent hardness, fast dry, economical | |
| 432-50M | MS | 50 | Y-Z2 | 3 | Soya | Excellent water, detergent, chemical resistance, satins or flats | |
| 458-60M | MS | 60 | Z-Z2 | 3 | Soya | Enamels and floor finishes | |
| 469-50X | Xylol | 50 | Z1-Z3 | 3 | Linseed | Fastest dry, hardness and abrasion resistance, aerosols and traffic markers | |
| 472-42M | MS | 42 | O-R | 3 | Soya | Polyurethane containing ASA | |
| 495-50M | MS | 50 | Z1-Z3 | 3 | Soya | Excellent water, detergent, chemical resistance, satins or flats | |
| 855-80M | MS | 80 | Z1-Z3 | 3 | Mixed | High solids urethane | |
| LV3019-45MD | MS | 45 | B-D | 6 | Soya | Urethane varnish with driers, ready to use | |
| Solvent: MS - Mineral Spirits / PM - Propylene Glycol Monomethyl Ether / VMP - VM&P Naphtha | |||||||